| Catalog Number |
ACMA00045142 |
| Description |
FEP 610 is the copolymer of TFE and HFP, with good thermal stability, outstanding chemical inertness, excellent electrical insulation and low friction coefficient, and can be processedbya thermoplastic processing method. 610 resin with low molecular weight and highmeltindex has low extrusion temperature, high extrusion velocity (5-8 times of commonFEPresin), and good flexibility, fold resistance and tenacity. |
| Melting Point |
265±10 ℃ |
| Appearance |
Translucent particle, scrap metal, sand andotherimpurities cannot be mixed, particles withvisibledark spots cannot exceed 2% |
| Application |
Extrusion processed for generic type resin, mainly used for wire insulation layer, tubes, film, and so on. |
| Elongation At Break |
≥ 300% |
| Feature |
Dielectric Constant(106HZ): 2.15
Dissipation Factor(106 HZ): 7.10x10-4 |
| Melt Index |
8.1-12.0 g/10min |
| Notes |
Avoid processing at above 420℃ to prevent toxic gas from releasing |
| Packaging |
1. It should be packaged in two-layer plastic inner bag, and then sealed in outer packingplastic bag. Each bag has net weight of 25kg and certificate of approval.
2. It should be stored in a clean, dry, cool and shady environment to prevent mixing of impurities.
3. It is nontoxic, non-inflammable, nonexplosive and noncorrosive, so it is transportedaccording to non-dangerous goods. |
| Specific Gravity |
2.12~2.17 |
| Tensile Strength |
≥ 21.0 Mpa |
※ Please kindly note that our products are for research use only.
