| Catalog Number |
ACMA00045155 |
| Description |
Powder FKM is one kind of Fluoroelastomer with shape of powder, it could be used as processing agent of engineering plastic like HDPE, LLDPE and PP, in order to improve processing performance. |
| Density |
1.75-1.78g/cm3 |
| Appearance |
White granules |
| Application |
Processing aid for blow membrane, cast film; sheet and pipe extrusion; wire and cable, jacket extrusion |
| Shelf Life |
6 months and should be stored in clean, dry place with temperature below 30°С. |
| Content |
The fluorine content: not less 66% |
| Feature |
Remove or reduce the surface defect (like fracture of melt),improve the smooth and lightness of surface of finished product;
Reduce the gel of film and membrane
Reduce pressure of mold, energy consumption as well as temperature;
It will also reduce surface melting viscosity, remove the die accumulation.
It will reduce production cost and improve the production efficiency. (under same mold pressure and temperature) |
| Moisture Content |
≤0.3% |
| Mooney Viscosity |
40-70 (at 121°C) |
| Notes |
Processing guide:
It is suggested that firstly make master batch through extruder with Powder FKM content 2%-3%, then mix with polymer for processing at certain ratio. |
| Operating Temperature |
-20 to 250 °С |
| Packaging |
Sealed in PE bag and packed in drum with net weight 25kgs. |
| Size |
600-1000μm |
| Tensile Strength |
13.1 MPa |
| Volatiles |
Max 0.25% |
※ Please kindly note that our products are for research use only.
