Fluoropolymers / Alfa Chemistry
Banner

Micronized PTFE Wax PTFE-04

ONLINE INQUIRY
Catalog Number ACMA00045215
Description 1. The product has very good heat resistance, lubricating effect, dispersing effect, and good storage stability.
2. The product can make the product surface with very low friction coefficient when added into coatings and inks, improve the abrasion resistance,scratch resistance and lubricity of the products.
3. With the addition level at 0.1%~3%, it can obviously improve the lubricity of the inks,improve the abrasion resistance of the finished products, avoid paper bonding.
4. Be used in powder coating, the micronized PTFE provide a distinct performance on scratch resistance.
Melting Point 320 ℃
Appearance White Powder
Storage 1. Net weight: 25kg / barrel.
2. This product is non-dangerous goods. Please store it away from ignition sources and strong oxidants.
3. Do not smoke while operating the micronized PTFE, avoiding the cigarette burns into micronized PTFE for it can produce some toxic gases.
Composition PTFE Wax
Particle Size Dv50: 5-6μm;
Dv90: 10μm
Usage 1. In a variety of systems, the recommended addition level ranges from 0.5 to 3%.
2. Usually by way of a direct high-speed stirring, it can disperse in solvent-based coatings and inks.
3. It can be added by using a variety of grinding machines, and high-shear dispersing device. Must pay attention to the control of temperature.
4. Can make a wax dispersion with the wax concentration at 20-30% by pre-dispersing treatment, add it into the systems when needed, by which can reduce the dispersion time.

If you have any other questions or need other size, please get a quote.

※ Please kindly note that our products are for research use only.